Huawei

Huawei HG8145V5

Complete guide, manuals, and troubleshooting for the HG8145V5 router.

OverviewLogin GuideWiFi SetupFactory Reset

About the HG8145V5

The Huawei HG8145V5 is a high-performance router designed for reliable home and small office networking. Select one of the tabs above to access the detailed login guide, WiFi setup instructions, or factory reset procedures.

Frequently Asked Questions

What is the default access IP for Huawei HG8145V5?
The default login IP address for the Huawei HG8145V5 GPON terminal is 192.168.100.1. Open your browser and navigate to http://192.168.100.1 to open the admin panel.
How do I change the default admin password?
Once logged in, navigate to System Tools > Modify Login Password. Enter your current password and set a new strong administrator password to prevent unauthorized config modifications.
What does a blinking red LOS light mean on HG8145V5?
A blinking red LOS (Loss of Signal) light indicates that the ONT is not receiving an optical signal from the fiber cable. Check the green connector on the bottom, avoid bending the cable, and call your ISP to test line signals.
How do I configure bridge mode on this Huawei ONT?
Log in as telecomadmin, go to WAN > WAN Configuration, create or modify the WAN interface, set WAN Mode to Bridge, configure the VLAN ID, and bind it to the LAN port connected to your external router.
Can I set up a guest network on the HG8145V5?
Yes. Log into the gateway, go to WLAN > WLAN Configuration, enable SSID2 or SSID3, name it for your guests, and configure a distinct security key to separate guest traffic from your main network.

Related Guides

Recommended troubleshooting and setup articles you might find useful.

View all

Other Huawei Routers

Related Guides

Recommended troubleshooting and setup articles you might find useful.

View all