TP-Link Archer C6

# TP-Link Archer C6 WiFi Setup Guide

Step 1: Connect to the Router

1. Connect your computer or device to the TP-Link Archer C6 using an Ethernet cable or Wi-Fi.

1. If using Wi-Fi, search for the network named TP-LINK_XXXX (XXXX is a unique number).

Step 2: Access the Admin Panel

1. Open a web browser.

1. Enter http://tplinkwifi.net or 192.168.0.1 in the address bar.

1. Log in:

- Username: admin
- Password: admin
> Note: If credentials have been changed and lost, a factory reset is needed.

Step 3: Start the Wireless Setup

1. Click on Basic > Wireless.

1. Under the Wireless Settings section:

- Wireless Network Name (SSID): Change to your desired network name.
- Region: Select your country/region from the dropdown menu.
- Channel: Choose a channel (typically, Auto works well).
- Channel Width: Keep it at 20/40MHz.

1. Enable Wireless Radio: Ensure it is checked.

Step 4: Set Security and Password

1. Scroll down to Wireless Security.

1. Select WPA/WPA2-Personal for security.

1. Set a strong password for your Wi-Fi network in the WPA Passphrase field.

1. Click Save to apply the settings.

Step 5: Connect Devices

1. Use the new SSID to connect devices over Wi-Fi using the chosen password.

---