TP-Link Archer C6

# TP-Link Archer C6 Factory Reset Guide

Step 1: Locate the Reset Button

1. Find the Reset button on the back of the router.

- It may be recessed, requiring a pin or paperclip.

Step 2: Perform the Factory Reset

1. Ensure the router is powered on.

1. Press and hold the Reset button for about 10 seconds until the system LED starts blinking.

1. Release the button.

1. Wait for the router to reboot (approximately 1-2 minutes).

Step 3: Reconfigure the Router

1. Connect to the router (Wi-Fi or Ethernet).

1. Access the admin panel using http://tplinkwifi.net or 192.168.0.1.

1. Use default login credentials:

- Username: admin
- Password: admin
> Note: All previous configurations will be lost after reset.