Tenda AC6

# Tenda AC6 WiFi Setup Guide
This guide will help you configure your Tenda AC6 router for optimal performance and help you troubleshoot common issues.

Step 1: Connecting the Router

1. Unbox your Tenda AC6 router and connect it to a power source.

1. Connect your router to the modem using an Ethernet cable. Plug one end into the WAN port of the router and the other into the Ethernet port of the modem.

1. Connect your PC or laptop to one of the LAN ports on the router using another Ethernet cable or connect wirelessly using the default SSID.

Step 2: Accessing the Admin Interface

1. Open a web browser on your connected device.

1. Enter the default IP address: 192.168.0.1 in the address bar and press Enter.

1. You will be prompted to enter the username and password. Use the following credentials:

- Username: admin
- Password: admin

1. Click Login to access the router settings.

Step 3: Quick Setup Wizard

1. After logging in, you may be greeted with a setup wizard.

1. Follow the on-screen instructions to configure your Internet connection (choose your connection type, usually DHCP).

1. Set up your WiFi network name (SSID) and password.

1. Save changes and wait for the router to reboot if prompted.

Step 4: Configuring Advanced Settings (Optional)

Change the Router’s IP Address

1. Navigate to Advanced Settings > LAN.

1. Change the router's IP address to avoid conflicts with other devices (e.g., 192.168.1.1).

1. Save and restart the router.

DNS Configuration

1. Go to Advanced Settings > Internet.

1. Find the DNS settings and configure your preferred DNS servers (like Google: 8.8.8.8, 8.8.4.4).

1. Save changes.

Quality of Service (QoS) Settings

1. Navigate to Advanced Settings > QoS.

1. Enable QoS and prioritize bandwidth for specific applications or devices.

1. Save your settings.

Step 5: Testing Your Connection

1. Connect a device to your WiFi network.

1. Test internet connectivity by visiting websites or using an online speed test.

# Troubleshooting Common Issues
This section provides solutions to common Tenda AC6 network issues.

Issue: DNS Not Resolving

Symptoms

You can connect to the WiFi but cannot access websites.

Solution

1. Access the router’s admin interface as described earlier.

1. Navigate to Advanced Settings > Internet.

1. Change the DNS servers to public ones (e.g., 8.8.8.8, 8.8.4.4).

1. Save settings and reboot the router.

Issue: Slow Internet Speed

Symptoms

Web pages take a long time to load, streaming is sluggish.

Solution

1. Run a speed test to check your current speed.

1. Log into your router and check the QoS settings.

1. Ensure no bandwidth-heavy applications are running.

1. Consider moving the router to a more central location.

1. If connected via WiFi, switch to Ethernet for testing.

Issue: WiFi Connected but No Internet

Symptoms

Devices show connected to WiFi but cannot access the internet.

Solution

1. Restart the router.

1. Check if the modem is connected to the internet.

1. Ensure that all cables are properly connected.

1. Try doing a factory reset (see below).

1. If the issue persists, contact your Internet Service Provider (ISP).