Huawei AX3 (WS7200)

How to Set Up WiFi on Huawei AX3 (WS7200)

1. Connect your PC to the Huawei AX3 via Ethernet or join the default Wi-Fi network on the bottom label

1. Open a browser and go to 192.168.3.1

1. Log in with username: admin and password: admin (or your custom password)

1. The Huawei Smart Home App provides guided setup — download it and follow the Quick Setup

1. Under Settings > Wi-Fi, configure your 2.4GHz and 5GHz SSIDs and passwords. If you need to update WiFi credentials later, go to [change-wifi-password](file:///change-wifi-password).

1. Enable HarmonyOS Connect (for Huawei device ecosystem integration)

1. Set up One Wi-Fi (Smart Roaming) to allow seamless band steering.

Huawei AX3 WiFi 6 Features

The Huawei AX3 features true WiFi 6 (802.11ax) tech with several key performance improvements:

OFDMA (Orthogonal Frequency Division Multiple Access): Allows multiple devices to share a single channel simultaneously, significantly reducing latency and queuing.

MU-MIMO (Multi-User, Multiple-Input, Multiple-Output): Supports sending data streams to up to 4 devices simultaneously, maintaining high throughput.

160 MHz Channel Width: Doubles the channel bandwidth compared to Wi-Fi 5 routers, enabling speeds up to 2402 Mbps on the 5GHz band for compatible devices.

Optimize AX3 For Gaming

To minimize ping spikes and lag on the AX3, apply these gaming optimizations:

1. Access the router dashboard and navigate to More Services -> Wi-Fi Settings -> Wi-Fi Advanced Settings.

1. Change the 5GHz channel bandwidth to 160 MHz for maximum throughput.

1. Enable Wi-Fi Game Acceleration (deep integration for Huawei phones, and generic QoS queue priority for online consoles).

1. Configure manual high-performance DNS servers in the LAN settings. Check our guide on [best-router-for-gaming](file:///best-router-for-gaming) for more general optimizations.

Optimize AX3 For Fiber

For gigabit fiber plans, configure these WAN and NAT parameters:

1. Go to Connect to Internet on the top menu.

1. For most GPON fiber connections, set connection type to Dynamic IP (DHCP). If your fiber provider uses authentication, select PPPoE and input your account details.

1. Go to More Services -> System Settings -> System Settings and ensure that Hardware NAT Acceleration is active. This offloads packet forwarding from the CPU to the hardware switch chip, ensuring full gigabit speeds. More advanced options can be checked in [router-settings](file:///router-settings).