The TP-Link Archer AX73 is a high-performance router designed for reliable home and small office networking. Select one of the tabs above to access the detailed login guide, WiFi setup instructions, or factory reset procedures.
Frequently Asked Questions
Does the TP-Link Archer AX73 support Wi-Fi 6?
Yes, the Archer AX73 is a dual-band Wi-Fi 6 (802.11ax) router supporting AX5400 combined speeds: 4804 Mbps on the 5GHz band and 574 Mbps on the 2.4GHz band. It features 4x4 MU-MIMO, OFDMA, and Target Wake Time (TWT).
How do I change the Wi-Fi password on Archer AX73?
Log in to 192.168.0.1, go to Advanced > Wireless > Wireless Settings. Update the Password field for both the 2.4GHz and 5GHz bands. Click Save to apply the new credentials.
How do I update the firmware on my Archer AX73?
Log in to 192.168.0.1, navigate to Advanced > System > Firmware Upgrade. Click Check for Upgrade. If available, click Upgrade Now. Do not power off the router during the upgrade process.
What is the default admin password for the Archer AX73?
The Archer AX73 requires you to create a custom admin password during initial setup. Unlike older TP-Link models, there is no preset factory password. Log in at 192.168.0.1 for the first time and set your own secure password.
How do I enable OFDMA on Archer AX73?
Log in to the dashboard, go to Advanced > Wireless > Wireless Settings (Advanced). Enable the OFDMA option. This allows multiple devices to share the same Wi-Fi channel simultaneously, reducing latency in homes with many connected devices.
How do I set up port forwarding on Archer AX73?
Go to Advanced > NAT Forwarding > Port Forwarding. Click Add. Enter the external port range, internal IP (assign a static IP to your device via DHCP Address Reservation first), internal port, and select TCP/UDP protocol. Click Save.
What is Smart Connect on Archer AX73?
Smart Connect is a band-steering feature that combines the 2.4GHz and 5GHz Wi-Fi bands under a single SSID. The router automatically assigns connected devices to the optimal band based on signal strength and available bandwidth.
How do I disable WPS on Archer AX73?
Log in to 192.168.0.1, go to Advanced > Wireless > WPS. Toggle the WPS switch to Off and click Save. Disabling WPS prevents brute-force PIN attacks against your router.
Can I use the TP-Link Tether app to manage Archer AX73?
Yes, the TP-Link Tether app (available for iOS and Android) provides full management including setup, speed tests, client monitoring, parental controls, and remote access via TP-Link ID.
How do I configure a guest network on Archer AX73?
Go to Advanced > Guest Network. Enable the guest network for 2.4GHz or 5GHz. Set a unique SSID and password. Ensure 'Allow Guests to Access My Local Network' is disabled to isolate guest devices from your main LAN.
What should I do if 192.168.0.1 is not loading?
Verify your Ethernet cable is plugged into a LAN port (not the WAN port). Disable any VPN clients. Open Command Prompt and run 'ipconfig' — ensure your IPv4 address is in the 192.168.0.x range. Try accessing tplinkwifi.net as an alternative.
Does the Archer AX73 support AiMesh or mesh Wi-Fi?
The Archer AX73 does not support ASUS AiMesh. However, it supports TP-Link OneMesh when paired with compatible TP-Link range extenders (e.g., RE650 or RE600X), creating seamless whole-home Wi-Fi coverage.
Related Guides
Recommended troubleshooting and setup articles you might find useful.