TP-Link Archer AX21

# Factory Reset Guide for TP-Link Archer AX21

Introduction

If you are facing persistent issues with your Archer AX21 or cannot access the admin panel, performing a factory reset can help restore the router to its original settings.

Steps to Factory Reset

Method 1: Using the Reset Button

1. Power On the Router: Ensure that your TP-Link Archer AX21 is powered on.

1. Locate the Reset Button: Find the reset button, usually located at the back of the router.

1. Press and Hold: Using a paperclip or a similarly pointed object, press and hold the reset button for about 10 seconds.

1. Release the Button: After 10 seconds, release the button. The router will reboot automatically.

1. Wait for Reboot: Allow a few minutes for the router to fully reset and reboot.

Method 2: Using the Admin Interface

1. Open a web browser and access the admin panel by typing http://192.168.0.1.

1. Log in with your credentials (default: admin/admin).

1. Navigate to System Tools > Backup & Restore.

1. Click on Factory Restore.

1. Confirm the action and wait for the router to reset and reboot.

Conclusion

After performing a factory reset, all configurations will revert to the default settings. You will need to reconfigure your Archer AX21 as per your requirements.